Specifications of T-DAR^® Components

T-DAR Control Unit

• Size: H 16 1/2" X W 14 1/16" X D 6.0" (419 mm X 360 mm X 152 mm)
• Weight: 26 Ibs (11.7 kg)
• Enclosure: Bent steel; completely enclosed with door
• Mounting: Mounting via 4 x 1/4" (6.35 mm) holes on back panel tabs (optional mounting brackets available)
• Standard Operating Temperature: 40° to 110° F (5° - 43 ° C) (optional high and low temperature systems available)
• Storage Temperature: 0° to 125° F (-18° - 52° C)
• Power Considerations: The T-DAR system requires a stable DC power. If the systems is installed in an area where the DC power is not stable and is subject to severe fluctuations and/or discontinuity, the use of an uninterruptible power supply (UPS) is mandatory..
• Input Voltage/Current: 24 VDC Listed (26VDC MAX) @ 10A
• Inputs: 14 Opto-isolated digital
• Outputs: 6 Relays 3A each
• Video Out: VGA, NTSC/PAL (Software Selectable)
• Connectors: Phoenix style, BNC (RG-59U and RJ45)<
• Serial Connections: 2 RS232 and 4USB

T-DAR Stereo Camera Tracking Head

• Size: 7.00" x 2.50" x 2.50" (178 mm X 63.5 mm X 63.5 mm)
• Weight: 2.2 Ibs (1 kg)
• Enclosure: Bent steel
• Mounting: Mounting via 4 x 1/8" (3.175 mm) holes on back panel tabs (optional mounting brackets available)
• Standard Operating Temperature: 40° to 125° F (5° - 52 ° C) (optional high and low temperature systems available)
• Storage Temperature: 0° to 150° F (-18° - 66 ° C)
• Input Voltage/Current: 12VDC 1A maximum (powered by the T-DAR control unit)
• Inputs: 1-RJ45 Std. ethernet from control unit
• Outputs: NTSC or PAL stereo video (specify)
• Video Connectors: BNC x2 (RG-59U)
• Focus and Field of View: Factory fixed, non-adjustable (correct part number must be specified for the application camera height)
• Lighting: Both Visible and Near IR (invisible to the human eye) DC200 camera heads are available. Minimum acceptable lighting level is 300 Lux (30 ft.-candles) from above.

T-DAR Annunciator

• Size: 6.00" x 8.13" x 7.19" (152 mm X 206 mm X 184 mm)
• Weight: 5 Ibs (2.27 kg)
• Enclosure: Bent steel, with high impact plastic indicator
• Standard Operating Temperature: 40° to 125° F (5° - 52 ° C) (optional high and low temperature systems available)
• Storage Temperature: 0° to 150° F (-18° - 66 ° C)
• Input Voltage/Current: 12VDC 2A maximum (powered by the T-DAR control unit)
• Inputs: RJ45 Std. ethernet cable from control unit
• Speaker Volume Control: rotary control with front panel access
• Illuminator: Xenon strobe with red colored diffuser

Back to Top

---

OPTIONAL EQUIPMENT:

T-DAR Door Position Encoder

• Size: 2.40" x 2.50" x 2.40" (61 mm X 64 mm X 61 mm)
• Weight: 13.5 ounces (.38 kg)
• Enclosure: Machined delrin
• Mounting: Mounting via 4 x 1/4" (6.35 mm) holes on back panel (optional mounting brackets available)
• Standard Operating Temperature: 40° to 125° F (5° - 52 ° C) (optional high and low temperature systems available)
• Storage Temperature: 0° to 150° F (-18° - 66 ° C)
• Input Voltage/Current: 12VDC 500mA maximum (powered by the
  T-DAR control unit)
• Inputs: RJ45 Std. ethernet from control unit
• Outputs: Quadrature digital output

 

T-DAR Cable Extender/Amplifier

• Size: 3.55" x 3.55" x 3" ( 90.2 mm X 90.2 mm X 76.2 mm)
• Weight: 1.5 Ibs (.68 kg)
• Enclosure: Extruded aluminum
• Mounting: Mounting via back panel mounting holes
• Standard Operating Temperature: 40° to 125° F (5° - 52 ° C) (optional high and low temperature systems available)
• Storage Temperature: 0° to 125° F (-18° - 52° C), required to extend the standard maximum distance of 200'  (61 m) from the door to the
  T-DAR control unit
• Input Voltage/Current: EA101 powered by the T-DAR control unit, no external power required. EA101A supplied plug mounted power supply, 115/230 VAC 50-60Hz 28 watts
• Inputs (from protected door): 2 BNC (RG59U): 2 stereo cameras from the DC200LP, 2 RJ45 (standard ethernet jack): 1 DC200LP stereo camera head power, 1 S100 annunciator unit
• Outputs: (to the DC100/200 control unit or additional EA101A extender/amplifier: 2 BNC (RG59U): 2 stereo cameras, 2 RJ45 (standard ethernet jack): 1 DC200LP stereo camera head power,
  1 S100 annunciator unit

Stereo Camera Head Mounting Kit

• Size: 24¼" x 6" (61.6 cm X 15.24 cm)
• Weight: 2.25 Ibs (1.02 kg)
• Material: Bent steel
• Mounting: Once the rails are installed between the grid members of a standard acoustical tile ceiling, the camera holding plate may be moved into the best position.

Heated Stereo Camera Head Enclosure

• Size: 4.625" (108.33 mm) X 6.0" (152.4 mm) X 12.75" (323.85 mm)
• Weight: 5 lbs (2.27 kg)
• Enclosure: Clear Acrylic panels 0.375" (9.53 mm) thick attached with hex-drive machine screws
• Mounting: Ceiling Mounting - via 4 x 0.25" (6.35 mm) holes on top panel. Camera Mounting - via 4 x 1/8" (3.175 mm) holes on inside top panel
• Operating Temperature: Built in 50W heater turns on via thermostat when temperature inside the box drops below 70F. In addition, activated desiccant inside the enclosure is designed to prevent humidity or condensation from forming on the interior.
• Input Voltage/Current: 24vdc @ 2.1A max.

Stereo Camera Head Wall Bracket

• Size: Length - 2.5" (63.5 mm) X 26.5" (673.1 mm) Base Plate - 0.25" (.635 mm) X 6.0" (152.4 mm) X 8.0" (203.2 mm)
• Weight: 3.4 lbs (1.54 kg)
• Material: Aluminum sheet and extruded square tube stock, welded and powder coated
• Mounting: Wall Mounting - via 4 x 0.375" (9.53 mm) holes on base panel. Camera Mounting - via 4 x 1/8" (3.175 mm) holes on outer arm.

Stereo Camera Head Ceiling Height Extender

• Size: H 4.7" (119.38 mm) X W 14" (355.6 mm) X L 19" (482.6 mm)
• Enclosure: 12 gauge (0.080" / 2.032 mm) aluminum sheet riveted and powder coated
• Mounting: via 12 x 0.25" (6.35 mm) holes (three on each side tab).
• Camera Mounting: via 4 x 1/8" (3.175 mm) holes on top panel.

Back to Top

  

The T-DAR Control Unit is the operator for the mantrap or door system. It connects all inputs and outputs. Each Control Unit will cover a floor space up to 10 x 10 feet
(3 x 3 m).

The T-DAR Camera Tracking Head uses stereo vision to detect the three dimensional characteristics of humans. Up to four Stereo Heads may be connected to each controller and each head will cover 5 x 5 feet (1.5 x 1.5 m) of floor space.

The T-DAR Annunciator provides alarms and instruction local to the secure door or mantrap. A strobe, buzzer, and various configurable voices provide notification during tailgating/piggy-backing, as well as provide recorded, spoken instruction to the user.

The Door Position Encoder tracks the precise movement of doors that swing inward, under a T-DAR Stereo Camera Head. Using this position information, the T-DAR system ignores door movement while focusing on human transition.

The Cable Extender/Amplifier extends the distance that the Control Unit can be from the T-DAR doorway or mantrap. A Cable Extender is required for distances greater than 200ft (61m).

The Stereo Camera Mounting Kit provides positioning of the T-DAR Stereo Tracking Head in a drop ceiling. Steel struts support the camera weight and a cover plate provides a sleek finished appearance.

The Heated Camera Head Enclosure provides a dry weatherproof environment for the
T-DAR Stereo Camera Head. The Heated Enclosure kit provides mounting for a drop ceiling.

The Stereo Camera Head Wall Bracket is used for mounting a DC200LPLP to a flat wall, as well as for locations where ceiling height is in excess of 11 feet (3.35 M).